Caliber L4-2.4L (2009)
Sunroof / Moonroof Switch: Service and Repair
Sunroof Switch - Installation
INSTALLATION
1. Position the sunroof control switch (4) into the vehicle.
2. Connect the sunroof control switch electrical connector (3).
3. Insert the sunroof control switch (4) into the courtesy/reading lamp assembly (2). Push up on the switch until it is securely held in place by the
mounting tabs (5).
4. Insert the mounting tab (4) on the lamp lens (5) into the right side of the lamp assembly and pivot the lens up until it snaps securely in place.
5. Connect the negative battery cable.
