Removal of Boost Gauge - Component Information for Caliber L4-24L (2009)
Turbo Boost Gauge: Service and Repair
Boost Gauge - Installation
INSTALLATION
1. Slide the boost gauge into the bezel and upper panel and install the two nuts (1).
2. Connect the one electrical connector (2).
3. Install the screws that were taken out to allow the left side of the upper panel to be lifted up. See: Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Pad - Installation.
4. Install the instrument panel top cover See: Dashboard / Instrument Panel/Service and Repair/Instrument Panel Cover - Installation.
5. Install the A-pillar trim, both right and left sides See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar