Caravan AWD V6-201 3.3L (1991)
Fig 16 Installing Bushings
Guide Pin Sleeve Bushing Installation
a. Fold the bushing in half lengthwise at the solid middle section of the bushing.
Removing Bushing From Caliper
b. Using your fingers insert the folded bushing into the caliper assembly. Making sure the solid section of the bushing is fully seated into the
bushing hole of the caliper assembly. Do not use a sharp object to perform this step due to possible damage to the bushing.
c. Unfold the bushing using your fingers or wooden dowel until the bushing is fully seated into the caliper assembly with the flanges seated
evenly on both sides of the bushing holes in the caliper assembly.