Caravan AWD V6-201 3.3L (1991)
Fig 7 Installing Caliper Sleeves
Guide Pin Sleeve Installation
a. Install the sleeve into one end of the bushing until the seal area of the bushing is past the seal groove in the sleeve.
b. Holding the convoluted end of the bushing with one hand. Push the sleeve through the bushing until the one end of the bushing is fully seaated
into the seal groove on the one end of the sleeve.
c. Holding the sleeve in place work the other end of the bushing over the end of the sleeve and into the seal groove. Be sure the other end of the
bushing did not come out of the seal groove in the sleeve.
NOTE: Before installing caliper assembly on vehicle, inspect braking disc for runout, thickness, and thickness variation.
7. Install caliper assembly.
8. Install brake hose to caliper using new seal washers.
9. Bleed the brake system.