dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Gauge - Inaccuracy|Page 1681 > < Fuel Gauge - Inaccuracy
Page 2
background image

3.

If there is a gap between the engine mount outer metal and insulator, see Fig. 1, replace the front engine insulator assembly. NOTE: THIS NOISE
IS MORE NOTICEABLE OUTSIDE OF THE VEHICLE.

MANUAL TRANSAXLE:

1.

Raise the vehicle with an assistant inside of the vehicle.

2.

Start the vehicle and observe the front engine mount, while the assistant shifts from neutral to first gear and neutral to reverse while releasing the
clutch slightly.

3.

If there is a gap between the outer metal and insulator, see Fig. 1, replace the front engine insulator assembly.
NOTE: THIS NOISE IS MORE NOTICEABLE OUTSIDE OF THE VEHICLE.

PARTS REQUIRED:

LEFT ENGINE MOUNT: - All except AC, AY Bodies and LeBaron and Shadow Convertibles:

1

Support Assembly:
Manual Transaxles

4668114

3 Speed, Automatic Transaxles

4668132

4 Speed, Automatic Transaxles

4668133

FRONT ENGINE MOUNT:

1

Insulator Assembly:
All 2.2L & 2.5L Automatic Transaxles

4612017

AC, AY, Bodies with 3.3L Engine
AY Body with 3.8L Engine
AS Bodies with 2.5L Engine, Automatic/Manual Transaxle

All 2.2L & 2.5L Manual Transaxles

4537072

AC Body with 3.0L Engine
AS Body with 3.3L Engine

AA,AG,AJ,AQ,AS Bodies with 3.0L engine

5272099

AS Body with 3.0L engine and Trailer Tow/Taxi pkg.

4556376

AS Body with 3.3L Engine - AWD

4612005

REPAIR PROCEDURE:

This repair involves replacement of either the left or front engine mount with a revised mount.

1.

Refer to the appropriate Service Manual for replacement procedures.

2.

Replace the appropriate mount with the mount called out in PARTS REQUIRED.

Fuel Gauge - Inaccuracy|Page 1681 > < Fuel Gauge - Inaccuracy