Caravan AWD V6-201 3.3L (1991)
Rollover/Pressure Relief Valve: Service and Repair
REMOVAL
Pressure Relief/Rollover Valve Removal
1.
Fuel system pressure must be released prior to service. See: Fuel Filter/Fuel Pressure Release/Service and Repair
2.
Fuel tank must be removed from vehicle prior to service.
3.
Slide the blade of a screwdriver between the rubber mounting grommet and the fuel pump module, making sure not to slide the screwdriver
between the roll-over valve and grommet.
4.
Remove the grommet from the valve, and make sure there is no damage or wear evident on the grommet. If grommet is worn it must be replaced.
INSTALLATION
1.
Install the rubber grommet into the fuel tank, and seat it around the curled lip of the tank.
2.
Lubricate the grommet with power steering fluid, and push rollover valve into grommet until properly seated. Twist grommet if necessary to align
to correct position.
3.
Reinstall fuel tank.