dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)]|Testing and Inspection > < Diagram Information and Instructions|Page 2111
Page 1
background image

Automatic Shut Down (ASD) Relay: Description and Operation

Auto Shutdown Relay

The Auto Shut Down (ASD) Relay controls power to the ignition coil, fuel injectors, and electric fuel pump. Controlled by the Single Board Engine
Controller (SBEC) the ASD supplies power to the ignition coil, fuel injectors, and electric fuel pump at all times when the ignition switch is in the
START position. When the ignition switch is in the RUN position and the SBEC is receiving reference signals from the distributor, power will also be
supplied. If there is no reference signal after two seconds the SBEC will de-energize the ASD and no power will be supplied to the ignition coil, fuel
injectors, or electric fuel pump.

Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)]|Testing and Inspection > < Diagram Information and Instructions|Page 2111