dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering Knuckle - Steering Wander|Page 5797 > < Steering Knuckle - Steering Wander
Page 2
background image

^

The correct knuckle for FWD vehicles have the steering arm attachment below the knuckle centerline, see Figure 1 (the left knuckle on these
has a wheel stop tab).

NOTE:

ON FWD VEHICLES THE CORRECT KNUCKLE WILL BE THE SIDE WITH THE SHORTEST MEASUREMENT TO THE GROUND.

Figure 2

^

The correct knuckle for AWD vehicles have the steering arm attachment at knuckle centerline, see Figure 2.

NOTE:

ON AWD VEHICLES THE CORRECT KNUCKLE WILL BE THE SIDE WITH THE LONGEST MEASUREMENT TO THE GROUND.

REPAIR PROCEDURE:

The repair involves replacement of steering knuckle.

NOTE:

IF KNUCKLE REPIACEMENT IS REQUIRED, IT WILL BE NECESSARY TO REPLACE THE OUTER JOINT SEAL.

1.

If it is determined that the vehicle has an incorrect knuckle, replace the incorrect knuckle, and align vehicle. Refer to the 1991 Front Wheel
Drive/All Wheel Drive Service Manual, # 81-370-1105, for repair procedures.

NOTE:

THE LEFT KNUCKLE ON FWD VEHICLES CAN BE EASILY DISTINGUISHED FROM THE AWD'S KNUCKLE BY THE
EXISTENCE OF A CAST WHEEL STOP TAB ON THE FRONT LOWER SURFACE OF THE KNUCKLE.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No. 02-05-30-90  . . . . . . . . . . . . . .  1.4 Hrs.

(includes front end alignment)

FAILURE CODE: OX - Wrong Part

Steering Knuckle - Steering Wander|Page 5797 > < Steering Knuckle - Steering Wander