Challenger V6-3.5L (2009)
9. Install the flex plate inspection cover (1) and tighten the fastener (2) to 11 Nm (97 in. lbs.).
10. Install the steering gear to cradle bolts and tighten the fasteners to 95 Nm (70 ft. lbs.).
CAUTION: Prior to coupling installation, make sure gear is centered in its travel to match clockspring centering in steering column.
11. Align the coupling (2) with the input shaft (3) and install the steering coupling. Install a new pinch bolt (1). Tighten the bolt to 54 Nm (40 ft. lbs.).