Challenger SRT-8 V8-6.1L (2009)
Valve Cover: Service and Repair
Cylinder Head Cover(s) - Installation
INSTALLATION
CAUTION: Do not use harsh cleaners to clean the cylinder head covers. Severe damage to covers may occur.
CAUTION: DO NOT allow other components including the wire harness to rest on or against the engine cylinder head cover. Prolonged
contact with other objects may wear a hole in the cylinder head cover.
1. Clean the cylinder head cover (1) and both sealing surfaces (1,4,). Inspect and replace gasket (2) as necessary.
2. Install the cylinder head cover and hand start all fasteners. Verify that all double ended studs (3) are in the correct location.