Challenger SRT-8 V8-6.1L (2009)
![background image](/dodge/challenger_srt-8/v8-6.1l/Page-683002.png)
3. Using the sequence shown, tighten the cylinder head cover bolts and double ended studs to 8 Nm (70 lbs in.).
4. Before installing the coil(s), apply dielectric grease to the inside of the spark plug boots (1).
5. Install the ignition coils.
6. Tighten the fasteners (3) to 7 Nm (62 in. lbs.).
7. Connect the ignition coil electrical connectors (1).
8. Install the PCV hose.