Challenger SRT-8 V8-6.1L (2009)
Oil Spray Jet: Service and Repair
Piston Oil Cooler Jet - Removal
REMOVAL
1. Remove the oil pan and oil pick-up tube. See: Oil Pan/Service and Repair/Engine Oil Pan - Installation
NOTE: When the oil pan is removed, a new oil pan gasket/windage tray assembly must be installed. The old gasket cannot be reused.
2. Discard the integral windage tray and gasket.
NOTE: It may be necessary to rotate the engine crankshaft to access the Piston Oil Cooler Jet retaining bolts.
3. Remove the Piston Oil Cooler Jet retaining bolt (2).
4. Remove the Piston Oil Cooler Jet (1).