Charger V6-3.5L (2009)
22. Install the spark plugs. Tighten to 28 Nm (20 ft. lbs.) See: Tune-up and Engine Performance Checks/Spark Plug/Service and Repair/Spark Plug -
Installation.
23. Install ignition coils (3) into cylinder head.
24. Install and tighten coil mounting bolts (2) to 6.7 Nm (60 in. lbs.).
25. Reposition engine wire harness and install retainers to cylinder head cover. Connect and lock electrical connectors to ignition coils (1) and EGR
valve.
26. Install the upper (2) and lower (7) timing belt front covers.
27. Tighten the timing cover bolts as follows:
-
M6 bolts - 12 Nm (105 in. lbs.)
-
M8 bolts - 28 Nm (250 in. lbs.)
-
M10 bolts - 54 Nm (40 ft. lbs.)