Charger V6-3.5L (2009)
NOTE: Position generator, bracket and all bolts to engine compartment. Hand tightening all fasteners. Then torque all fasteners to
specifications.
9. Position generator (1) to engine and loosely install lower mounting bolts (2).
10. Position generator bracket (4) and loosely install bracket bolt (3) and upper generator mounting bolt (2).
11. Tighten generator mounting bolts (2) to 65 Nm (48 ft. lbs.). Tighten generator bracket bolt (3) to 54 Nm (40 ft. lbs.).
12. Align pump (3) with mounting holes on engine bracket (2).
13. Install three pump mounting bolts (1) through access holes in pulley and engine bracket. Tighten bolts to 28 Nm (21 ft. lbs.) torque.