Charger V6-3.5L (2009)
3. Connect wheel speed sensor cable routing clip (2) at brake tube bracket (3).
4. Install lower shock mounting bolt (3) attaching shock assembly (1) to lower control arm (4). Do not tighten bolt at this time.
5. Slide stabilizer link (3) ball joint stem into shock assembly from front. Install nut fastening link (3) to shock assembly (1). Tighten nut by holding
ball joint stud while turning nut. Tighten nut using crow foot wrench on torque wrench to 128 Nm (95 ft. lbs.).
