Charger V6-3.5L (2009)
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. While a helper applies brakes to keep hub from rotating, remove hub nut (1) from the axle half shaft (2).
4. Access and remove front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal
5. Remove four bolts (3) fastening hub and bearing (2) to knuckle.
6. Slide hub and bearing (2) off axle half shaft (1) and knuckle.