Charger V6-3.5L (2009)
![background image](/dodge/charger/v6-3.5l/Page-1855010.png)
21. Align the holes on the 10176 Puller Plate (1) with the bolt holes in the output shaft flange (2), then install the 10176 Puller Plate (1) onto the
output shaft flange (2).
22. Install the 10176 Base (1) onto the puller plate.
NOTE: Install the 10176 Bearing (1) so that the bearing flange is facing up.
23. Install the 10176 Bearing (1).