Charger V6-3.5L (2009)
![background image](/dodge/charger/v6-3.5l/Page-1855011.png)
24. Install the 10176 Nut (1).
25. Tighten the nut until the Output Shaft (1) is pulled free of the output shaft sprocket.
26. Remove the Output Shaft Sprocket, the Drive Chain, and the Drive Sprocket as an assembly.
27. Remove the Input Shaft assembly (1) from the front case half (2).
28. Remove the output shaft seal.
Output Shaft Seal - Installation
INSTALLATION