Charger V8-5.7L (2008)
![background image](/dodge/charger/v8-5.7l/Page-3290001.png)
Windshield Washer Pump: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Drain washer fluid from the reservoir and into a suitable clean container. This can be done by disconnecting the windshield washer hose from the
front (outboard) washer pump and allowing the washer fluid to drain into a container through a temporary jumper hose connected to the front
washer pump.
3. Remove the washer reservoir See: Windshield Washer Reservoir/Service and Repair/Washer Reservoir - Removal.
4. Remove the washer pump motor by pulling out of reservoir. Inspect the grommet and if installing a new motor, always use a new grommet.