Charger SRT-8 V8-6.1L (2009)
Water Pump: Removal and Replacement
Water Pump - Removal
5.7L/6.1L ENGINE
1. Disconnect negative battery cable.
2. Drain cooling system See: Cooling System/Service and Repair.
3. Remove radiator fan assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Cooling Fan - Removal.
4. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Removal
5. Remove thermostat See: Cooling System/Thermostat/Service and Repair/Engine Coolant Thermostat - Removal
NOTE: The water pump mounting bolts (2) are different lengths. Note the location of the water pump mounting bolts (2).
6. Remove water pump mounting bolts (2) and remove water pump (1).
Water Pump - Installation
5.7L/6.1L ENGINE
