Charger SRT-8 V8-6.1L (2009)
Spot Lamp: Service and Repair
Spot Lamp Bulb - Installation
BULB
1. Position bulb into spot lamp assembly.
2. Install the hold downs.
3. Connect the electrical connector to the spot lamp head assembly.
4. Tilt the sealed beam (2) toward the spot lamp head assembly.
5. Install the bezel to the spot lamp head assembly.
6. Install the screws (1) retaining the bezel to the spot lamp head assembly.
7. Lower the spot lamp from the operating to stowed position.
8. Install the fuse and PDC cover.