Colt L4-1597cc 1.6L DOHC (1989)
Wheel Hub: Service and Repair
Removal and Installation
AXLE HUB
SERVICE POINTS OF REMOVAL
2. Removal of drive shaft nut
-
Loose the drive shaft nut while the vehicle is on the ground with the brakes applied.
4. Removal of caliper assembly
-
Remove the caliper assembly and suspend it with wires.
6. Disconnect of lower arm ball joint
-
Using the special tool, disconnect the lower arm ball joint from the knuckle.
CAUTION:
-
Be sure to tie the cord of the special tool to the nearby part.
-
Loose the nut but do not remove it.
8. Disconnection of tie rod end
-
Using the special tool, disconnect the tie rod end from the knuckle.
CAUTION:
-
Be sure to tie the cord of the special tool to the nearby part.
-
Loose the nut but do not remove it.
9. Removal of drive shaft
-
Use the special tool to push out the drive shaft from the front hub.