Alignment: Specifications
- Make
- Dodge
- Model
- D250 D 250 Pickup
- Engine
- L6-359 5.9L DSL
- Year
- 1992
- Section
- Alignment › Specifications
Alignment: Specifications
Acceptable Alignment Range Camber
0 to +1 deg
Caster
+1 to +2 deg
If vehicle wanders caster should be increased. If steering
effort is very high, especially when cornering, caster
should be decreased.
Turn Angle (Base Tire) Left and Right
33 deg
Toe-In (At Hub Height)
0 to + 0.50 deg
Preferred Settings
Camber
+1/2 deg
Caster
+1/2 deg
If vehicle wanders caster should be increased. If steering
effort is very high, especially when cornering, caster
should be decreased.
Turn Angle (Base Tire) Left and Right
33 deg
Toe-In (At Hub Height)
0.25 deg
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1992 Dodge D250 5.9L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Dodge power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.