Dakota 2WD L4-2.5L VIN P (2001)
UNIVERSAL TRANSMITTER
On some models a Universal Garage Door Opener (UGDO) transceiver is standard factory-installed equipment. The UGDO transceiver is integral
to the overhead console. The only visible component of the UGDO are the three transmitter push buttons at the rear of the overhead console. The
three UGDO transmitter push buttons are identified with one, two or three raised tactile bumps so that they be easily identified by sight or by feel.
Each of the three UGDO transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to
transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting,
security systems or just about any other device that can be equipped with a radio receiver in the 286 to 399 Mega Hertz (MHz) frequency range
for remote operation. The UGDO is capable of operating systems using either rolling code or non-rolling code technology
The UGDO cannot be repaired, and is available for service only as a unit. This unit includes the push button switches and the plastic module.
The UGDO operates on a non-switched source of battery current so the unit Will remain functional, regardless of the ignition switch position. For
more information on the features, programming procedures and operation of the UGDO, see the owner's manual in the vehicle glove box.
