Dakota 2WD L4-2.5L VIN P (2001)
![background image](/dodge/dakota_2wd/l4-2.5l_vin_p/Page-1427006.png)
10. Align the shaft splines to the outer C/V joint splines. Push the outer C/V joint until the snap ring seats in the groove (Fig. 20).
11. Ensure that the snap ring is properly seated in the housing. Pull the outer C/V joint from the interconnecting shaft to test.
12. Place the large-diameter end of the replacement boot over the edge of the C/V joint housing. Ensure that the boot is not twisted.
13. Retain the boot on the housing with a replacement retaining clamps.