Dakota 2WD V8-4.7L Flex Fuel (2009)
3. Spread the bottom of the inboard (1) and outboard (3) retractor cover halves apart and disengage the snaps located at the top of the cover halves
and remove the cover halves.
Outer Front Seat Belt Retractor Cover - Installation
INSTALLATION
1. Position the inboard (1) and outboard (3) outer seat belt retractor cover halves around the seat belt (2) with the top of each half angled toward the
other and engage the snaps that secure the two halves together. Then, close the cover around the seat belt.
2. Using hand pressure, push the retractor cover (1) downward over the retractor (3) far enough to engage the two locator pins in the top of the