Dakota 2WD V8-4.7L Flex Fuel (2009)
![background image](/dodge/dakota_2wd/v8-4.7l_flex_fuel/Page-2715014.png)
inboard cover half with the locator holes in the top of the retractor.
3. Install the two plastic push-pin retainers (2) that secure the retractor cover to the retractor.
A-Pillar Trim Panel-Removal
REMOVAL
1. Using a small flat bladed tool or equivalent, carefully open the two fastener covers in the A-pillar trim panel (1).
2. Remove the two bolts (2) that secure the A-pillar trim panel to the A-pillar and remove the trim panel.
A-Pillar Trim Panel-Installation
INSTALLATION
1. Position the locating tabs (3) of the A-pillar trim panel into the slots located in the top of the instrument panel and install the trim panel (1) onto
the A-pillar.
2. Install the two bolts (2) that secure the A-pillar trim panel to the A-pillar. Tighten the bolts to 6 Nm (55 in. lbs.).
3. Close the two fastener covers in the A-pillar trim panel.
Lower
INSTALLATION