Dakota 4WD V8-4.7L (2009)
Vehicle Lifting: Service and Repair
STANDARD PROCEDURE
WARNING: The hoisting and jack lifting points provided are for a complete vehicle. When a chassis or drivetrain component is removed from
a vehicle, the center of gravity is altered making some hoisting conditions unstable. Properly support or secure vehicle to hoisting
device when these conditions exist.
FLOOR JACK
LIFT POINTS
CAUTION: Do not attempt to lift a vehicle with a floor jack positioned under:
-
an axle tube.
-
aluminum differential.
-
a body side sill.
-
a steering linkage component.
-
a drive shaft.
-
the engine or transmission oil pan.
-
the fuel tank.
-
a front suspension arm.
When properly positioned, a floor jack can be used to lift a Dakota vehicle. Support the vehicle in the raised position with jack stands at the front and
rear ends of the frame rails.
HOIST
A vehicle can be lifted with:
-
A single-post, frame-contact hoist.
-
A twin-post, chassis hoist.
-
A ramp-type, drive-on hoist.
NOTE: When a frame-contact type hoist is used, verify that the lifting pads are positioned properly.