Daytona IROC R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1993)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor And Idle Air Control Motor Location
Removal
1.
Disconnect negative battery cable.
2.
Disconnect sensor wiring at sensor.
3.
Remove mounting screws (2), and lift sensor off throttle shaft.
Installation
1.
Install sensor on shaft and tighten mounting screws to 17 in-lbs (2 Nm)
2.
Attach wiring to sensor and connect negative battery cable.