Durango 2WD V6-3.7L (2009)
EGR Valve: Service and Repair
Exhaust Gas Recirculation (EGR) Valve - Installation
INSTALLATION
1. Clean the gasket area (1) at the rear of the left cylinder head where it joins the base of the EGR valve.
2. Clean the EGR routing tube where it joins the EGR valve.
3. Position a new gasket between the EGR valve and the cylinder head.
4. Position the EGR valve to the cylinder head and tighten the retainers to 9 Nm (80 in. lbs.).