Durango 2WD V8-4.7L Flex Fuel (2009)
Resonator: Service and Repair
Installation
INSTALLATION
1. If removed, install the intake air temperature (IAT) sensor. See: Computers and Control Systems/Intake Air Temperature Sensor/Service and
Repair/Installation
2. If removed, install the two resonator mounting brackets (4) to the top of the engine and install the retaining bolts (3). Tighten the bolts securely.
3. Position the resonator (2) to the top of the engine and connect it the throttle body (5). Make sure the resonator is properly installed over the throttle
body inlet.
4. Install the two bolts (1) that secure the resonator to the resonator mounting brackets. Tighten the bolts securely.
5. Connect the engine wire harness connector to the IAT sensor. See: Computers and Control Systems/Intake Air Temperature Sensor/Service and
Repair/Installation
6. Install the air intake hoseSee: Air Cleaner Housing/Service and Repair/Air Cleaner Body - Installation.
7. Reconnect the negative battery cable.
