Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Engine Mount: Service and Repair
Mount - Engine Rear
Removal
REMOVAL
1. Raise vehicle on hoist.
2. Using a suitable jack, support transmission.
3. Remove the nut from the insulator mount through bolt (Manual transmission and 4x2 automatic transmission only) .
4. Remove the four bolts and washers retaining the mount to the transmission (4x4 automatic transmission only).
5. Raise the transmission enough to remove the through bolt (Manual transmission and 4x2 automatic transmission only) .
6. Raise the transmission and remove the bolts retaining the mount to the crossmember (4x4 automatic transmission only).
