Durango 4WD V8-5.9L VIN Z (1998)
Amplifier Remove/Install
7. Remove the two screws that secure the amplifier to the right cowl side inner panel.
8. To disengage the upper hook bracket of the amplifier from the upper hinge access hole in the cowl side inner panel:
a. Raise the amplifier upwards about 5 centimeters (2 inches).
b. Tilt the top of the amplifier inwards towards the instrument panel.
c. Keep the top of the amplifier tilted towards the instrument panel while lowering the unit from between the cowl side inner panel and the
heater-A/C housing.
9. Reverse the removal procedures to install. Tighten the amplifier mounting screws to 2 N.m (17 in. lbs.). Tighten the inner cowl side trim panel
mounting screw to 2.2 N.m (20 in. lbs.).