Durango 4WD V8-5.9L VIN Z (1998)
Speaker: Service and Repair
Rear Door
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the inside trim panel from the rear door.
Rear Door Speaker Remove/Install
3. Remove the three screws that secure the speaker to the lower front corner of the rear door inner panel.
4. Pull the speaker away from the rear door inner panel far enough to access and unplug the speaker wire harness connector.
5. Remove the speaker from the rear door.
6. Reverse the removal procedures to install. Tighten the speaker mounting screws to 2 N.m (17 in. lbs.).