Durango 4WD V8-5.9L VIN Z (1998)
Rear Door Panel: Service and Repair
Waterdam
WATERDAM
REMOVAL
1. Remove door trim panel.
2. Peel the waterdam from the door.
3. Route the latch rods and wire harnesses through the waterdam.
Fig. 12
4. Separate the waterdam from the door inner panel (Fig. 12).
INSTALLATI0N
1. Route the latch rods and wire harnesses through the waterdam.
2. Position the waterdam on the door, apply adhesive as necessary and press into place.
3. Install door trim panel.