Durango 4WD V8-5.9L VIN Z (1998)
Rear Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Using a grease pencil or equivalent, mark position of striker on C-pillar.
Fig. 7
2. Remove bolts attaching striker and shim to C-pillar (Fig. 7).
3. Separate striker from C-pillar.
INSTALLATION
1. Using alignment marks, position shim and striker on C-Pillar.
2. Install bolts and tighten to 28 N.m (20 ft.lbs.).
