Durango 4WD V8-5.9L VIN Z (1998)
Cowl Moulding / Trim: Service and Repair
COWL GRILLE AND SCREEN
REMOVAL
1. Open hood.
2. Remove the wiper arms.
Fig. 4
3. Remove upper plastic nuts attaching cowl grille to cowl (Fig. 4).
4. Insert a small flat blade into the slots of the plastic rivet anchors in each cowl grille corner. Lift up on the flat blade to release the rivet anchors.
5. Remove cowl weatherstrip.
6. Disconnect and plug windshield washer feed line from cowl.
7. Disconnect vacuum line from cowl.
8. Separate cowl grille from cowl.
INSTALLATION
1. Position cowl grille on cowl.
2. Connect vacuum line to cowl.
3. Remove the plug and connect windshield washer feed line to cowl.
4. Install cowl weatherstrip.
5. Position rivet anchors in place and press down to engage.
6. Install upper plastic nuts attaching cowl grille to cowl.
7. Install the wiper arms.
