Durango 4WD V8-5.9L VIN Z (1998)
Parking Brake Pedal: Service and Repair
REMOVAL
1. Remove left side kick panel.
Parking Brake Pedal Assembly
2. Remove brake release rod from pedal assembly.
3. Disconnect brake warning lamp switch.
4. Remove front parking brake cable.
5. Remove mounting nuts and mounting bolt.
6. Slide assembly rearward off the mounting studs.
INSTALLATION
1. Install assembly on the mounting studs.
2. Install mounting bolt and nuts.
3. Install front parking brake cable.
4. Connect brake warning lamp switch.
5. Install brake release rod to pedal assembly.
6. Install left side kick panel.
