Durango 4WD V8-5.9L VIN Z (1998)
The rear seat floor duct damper door is only serviced as part of the rear seat floor duct on bench seat models, or the center seat floor duct on bucket
seat models.
1. Remove the carpeting from the floor panel transmission tunnel.
Rear Seat Floor Duct Remove/Install - Split Bench Seat
Rear Seat Floor Duct Remove/Install - Bucket Seat
2. Remove the retainers that secure the ducts to the floor panel transmission tunnel.
3. Remove the duct(s) from the floor panel as required.
4. Reverse the removal procedures to install.
Demister Duct Adapter
1. Roll the instrument panel assembly down, but do not remove it from the vehicle. Refer to: Body and Frame, Interior Trim,
Dashboard/Instrument Panel, Service and Repair, Instrument Panel Assembly Replacement, See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Procedures/Instrument Panel Assembly Replacement
2. Disconnect the flexible demister duct hose from the demister duct adapter on the top of the heater-A/C housing.