Durango 4WD V8-5.9L VIN Z (1998)
NOTE:
A TRIM STICK SHOULD BE USED TO DISENGAGE THE SUNVISOR SUPPORT COVER FROM THE BASE.
10.
Lift and rock the sunvisor support upward to disengage it from the roof panel.
11.
Grasp both sides of the coat hook base and firmly pull outward to disengage the coat hook cover from the base (Figure 9).
NOTE:
A TRIM STICK SHOULD BE USED TO DISENGAGE THE COAT HOOK COVER FROM THE BASE.
12.
Lift and rock the coat hook upward to disengage it from the roof panel (Figure 10).
13.
Remove the screws attaching the overhead assist handle to the roof panel and separate it from the roof panel (Figure 11).
14.
Perform Steps 4 - 13 to the other side of the vehicle.
15.
If the vehicle is equipped with an overhead console, perform Steps 16 through 20. Proceed to Step 21 if the vehicle is not equipped with an
overhead console.
