Durango 4WD V8-5.9L VIN Z (1998)
16.
Remove the screw that secures the front of the overhead console to the front of the overhead console bracket (Figure 12).
17.
Insert the fingertips of both hands between the headliner and the sides of the overhead console housing in the area between the garage door opener
storage bin and the sunglasses storage bin.
18.
Pull downward on the sides of the overhead console housing firmly and evenly to disengage the two snap clips that secure the rear of the unit from
their receptacles in the overhead console bracket.
19.
Lower the overhead console from the headliner far enough to access the wire harness connector and disconnect the connector.
20.
Separate the overhead console from the headliner.
21.
Remove the front seat belt turning loop cover and turning loop from the driver and passenger side B-Pillars (Figure 13).
22.
Grasp the upper B-Pillar trim and pull outward to release the B-Pillar trim.
