dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sensors and Switches - Fuel Delivery and Air Induction > < Main Relay (Computer/Fuel System)|Locations|Page 2907
Page 1
background image

Rollover Valve: Description and Operation

Fig 1  Rollover Valve Location

The fuel tank is equipped with a rollover valve. The valve is located on the top of the fuel tank (Fig. 1). The valve will prevent fuel flow through the fuel
tank vent (EVAP) hoses in the event of an accidental vehicle rollover. The EVAP canister draws fuel vapors from the fuel tank through this valve.

The valve cannot be serviced separately. If replacement is necessary, the fuel tank must be replaced. Refer to Fuel Tank removal and installation in this
group.

ROLLOVER VALVE(S)

The pressure relief/rollover valves(s) are/is molded into the fuel tank and are not serviced separately. If replacement is necessary, the fuel tank must be
replaced. Refer to Fuel Tank Removal/Installation in Fuel System for procedures.

Sensors and Switches - Fuel Delivery and Air Induction > < Main Relay (Computer/Fuel System)|Locations|Page 2907