Durango 4WD V8-5.9L VIN Z (1998)
3.
Place a mark on the front differential vent hose 89 mm (3.5 in.) from the top of the vent, then cut the hose at the mark and discard the cut section
of hose (Figure 1).
4.
Slide one of the nipples of the front differential vent canister p/n 0501 6306AA onto the lower section of the hose remaining in the vehicle. Make
sure the vent hose is pushed completely onto the nipple of the canister by ensuring the hose is over the last barb.
5.
Insert the top section of the differential vent hose onto the remaining nipple of the front differential vent canister. Make sure the vent hose is
pushed completely onto the nipple of the canister by ensuring the hose is over the last barb.
6.
Inspect the level of the front differential lubricant. Fill the differential with SAE 80W-90 Gear Lubricant p/n 04874468.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
02-60-65-92
0.2 Hrs.
FAILURE CODE: P8- New Part
