Durango 4WD V8-5.9L VIN Z (1998)
8. Install preload adjuster nut. Do not tighten nut until after Over-Center Rotation Torque adjustment has been made.
9. Install gasket to side cover and bend tabs around edges of side cover.
10. Install pitman shaft assembly and side cover to housing.
11. Install side cover bolts and tighten to 60 Nm (44 ft. lbs.).
12. Adjust Over-Center Rotation Torque.
Spool Valve
DISASSEMBLY
1. Remove lock nut.
2. Remove adjuster nut with Spanner Wrench C-4381, or equivalent.
3. Remove thrust support assembly out of the housing.
4. Pull stub shaft and valve assembly from the housing.
