Durango 4WD V8-5.9L VIN Z (1998)
Accumulator Housing Screw Locations
22. Turn upper housing over and remove switch valve, regulator valve and spring, and manual valve.
23. Remove kickdown detent, kickdown valve, and throttle valve and spring.
Upper Housing Control Valve Locations
24. Loosen left-side 3-4 accumulator housing attaching screw about 2-3 threads. Then remove center and right-side housing attaching screws.
Shift And Converter Clutch Valve Springs And Plug
25. Carefully rotate 3-4 accumulator housing upward and remove 3-4 shift valve spring and converter clutch valve plug and spring.
