Durango 4WD V8-5.9L VIN Z (1998)
Accumulator Housing, Valve Springs And Plug
26. Remove left-side screw and remove 3-4 accumulator housing from valve body.
Boost Valve Tube Brace
27. Bend back tabs on boost valve tube brace.
Boost Valve Tube
28. Remove boost valve connecting tube. Disengage tube from upper housing port first. Then rock opposite end of tube back and forth to work it out
of lower housing.
CAUTION: Do not use tools to loosen or pry the connecting tube out of the valve body housings. Loosen and remove the tube by hand only.
