dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - Windows and Glass > < Heated Glass Element Switch|Locations|Page 7246
Page 1
background image

Heated Glass Element Switch: Service and Repair

REMOVAL

WARNING:  ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO RESTRAINT SYSTEMS BEFORE ATTEMPTING ANY
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO
TAKE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the heater-A/C Control assembly (Refer to HEATING & AIR CONDITIONING/ CONTROLS/A/C HEATER CONTROL -

REMOVAL).

Note:  Rear Window Defogger Switch is part of the heater-A/C Control assembly and is not a replaceable component. If damaged or inoperative
the entire heater-A/C control assembly must be replaced.

INSTALLATION

1. Install the heater-A/C control assembly (Refer to HEATING & AIR CONDITIONING/CONTROLS/A/C HEATER CONTROL -

INSTALLATION).

2. Install the negative battery cable. Note: the rear window defogger switch is a part of the heater A/C Control assembly, if damaged or inoperative

the entire Heater-A/C Control assembly must be replaced.

Relays and Modules - Windows and Glass > < Heated Glass Element Switch|Locations|Page 7246