dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C Discharge Line|Page 1696 > < A/C Discharge Line|Page 1694
Page 3
background image

NOTE:  On models equipped with the rear A/C system, the rear of the front A/C suction line also includes a hose and tube extension that connects the
front suction line to the underbody suction line.

1. Recover the refrigerant from the refrigerant system.
2. Disconnect and isolate the negative battery cable.
3. Remove the air cleaner top cover and snorkel from the air cleaner housing located on the right side of the engine compartment.
4. Disconnect the drain tube from the wiper module drain on the right side of the engine compartment.
5. Remove the nut that secures the suction line to the A/C compressor.
6. Disconnect the suction line from the A/C compressor and remove and discard the seal.
7. Install plugs in, or tape over the opened suction line fitting and the compressor port.

Suction Line

8. Disengage the retainer that secures the suction line routing clip to the receiver/drier mounting bracket on the side of the right front strut tower in

the engine compartment.

9. Remove the nut that secures the suction and liquid lines to the front A/C expansion valve.

10. Disconnect the suction and liquid lines from the front A/C expansion valve and remove and discard the O-ring seals.
11. Install plugs in, or tape over the opened suction and liquid line fittings and expansion valve ports.
12. Raise and support the vehicle.

A/C Discharge Line|Page 1696 > < A/C Discharge Line|Page 1694