dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt Retractor|Front|Page 7996 > < Recall - Right Front Seat Belt Retractor Inspection|Page 7993
Page 1
background image

Seat Belt Retractor: Service and Repair
Front

Seat Belt & Retractor - Front Outboard

REMOVAL

1. Open door.
2. Move seat all the way forward.
3. Open hood.
4. Disconnect and isolate the battery negative cable.

WARNING:  WAIT TWO MINUTES FOR THE AIRBAG SYSTEM RESERVE CAPACITOR TO DISCHARGE BEFORE
BEGINNING ANY AIRBAG SYSTEM OR COMPONENT SERVICE. FAILURE TO DO SO MAY RESULT IN ACCIDENTAL
AIRBAG DEPLOYMENT, PERSONAL INJURY OR DEATH.

Seat Belt - Outboard Front

5. Remove shoulder harness height adjuster knob by pulling it straight away from adjuster.
6. Remove cover from seat belt turning loop.
7. Remove bolt attaching turning loop to shoulder belt height adjuster.
8. Remove upper B-pillar trim cover.

NOTE:  If equipped with the Occupant Classification System (OCS), there is a Belt Tension Sensor located on the lower seat belt anchor on the
passenger front seat belt.

Seat Belt Retractor|Front|Page 7996 > < Recall - Right Front Seat Belt Retractor Inspection|Page 7993