Grand Caravan V6-3.8L (2009)
Reconnecting a connector to the wrong receptacle can damage the A/C-heater control system.
2. Remove the center bezel (3) from the instrument panel and place it on a workbench.
3. Remove the four screws (1) that secure the A/C-heater control (2) to the instrument panel center bezel and remove the control.
Second Row
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool # C-4755) or equivalent, gently pry the upper edge of the 2nd row heated seat switch bezel (4) away from the
sliding door trim panel (6).
3. Once the upper edge is free from the trim panel, rock the switch and bezel out of the sliding door trim panel opening.
4. Disconnect the heated seat switch wire harness connector (5).
5. From the back side of the switch bezel (4), gently pry the switch (3) free from the bezel.